Story
Small
Image
Biostom building
Disable image alteration
Off
SORBACAL® Heat: Rapid and effective infurnace DeSOx whilst keeping heat exchanger surfaces cleaner
Off
SORBACAL® Heat: Rapid and effective infurnace DeSOx whilst keeping heat exchanger surfaces cleaner
One column
The challenge

Biostoom Oostende is a Waste-to-Energy plant in Belgium that generates heat and electricity by incinerating non-recyclable industrial waste, while fully complying with European emission standards.

A collaboration was initiated with Lhoist to drive continuous improvement, aiming to enhance both boiler performance and Flue 
Gas Treatment
operations.

The first objective is to address periodic SO2 inlet peaks associated with seasonal or sudden changes in fuel composition.

The second is to reduce fouling in the furnace and heat exchangers, thereby enhancing plant safety, reliability, and efficiency

Open cta in a new tab
Off
Background Grey
Off
Graph Sorbacal Heat case study n°29.png
Figure 1: Lhoist CFD model for optimum sorbent dispersion (a) current design (b) recommended design.
One column
The Lhoist solution

Sorbacal® Heat is a new product family specially engineered for direct injection into furnaces at 850 – 1050 ºC. The sorbent is tailored to each customer’s application (fuel type / ashes / configuration) and requirements. 

At Biostoom, the dual functionality of acid gas abatement and boiler anti-fouling were provided. This was supported by robust technical assistance to ensure optimal sorbent conveying and dispersion, including the use of CFD modelling, expert consultancy, and Lhoist’s proprietary equipment and technologies to enhance dosing precision and product distribution within the boiler.

The success of this solution was made possible using Sorbacal® Heat and the close collaboration between Lhoist and Biostoom.

 

It’s not the how or the what but the Who that is so important to make something work.

Bart David, Biostoom Operations Manager
 

Open cta in a new tab
Off
Background Grey
Off
One column
The benefits

The use of Sorbacal® Heat led to significantly better acid gas abatement and boiler operation creating immediate and long-term operational gains:

  • Rapid and effective abatement of SO2 peaks 
  • Wider fuel flexibility 
  • Enhanced heat exchange efficiency
  • Improved reliability and lower maintenance costs
     
Open cta in a new tab
Off
Background Grey
Off
With fast SO₂ reduction and cleaner heat exchangers, Sorbacal® Heat optimizes in‑furnace efficiency.
Route category