Story
Small
Image
Waste-to-energy Plant as a Sustainable Energy Solution for the Future
Disable image alteration
Off
Enhanced mercury removal with dry sorbent injection
Off
Enhanced mercury removal with dry sorbent injection
One column
The challenge

The Reims Waste-to-Energy plant operated by Veolia has 2 kilns (6.5 t/h) and valorize household waste and ordinary industrial waste. 

The site is equipped with a dry flue gas treatment consisting of an injection of Sorbacal® SPS for the abatement of acid gases and Sorbacal® Micro 4099 for micropollutants upstream of a baghouse filter with operating temperatures between 180 and 220°C 

As part of the application of the BAT (Best Available Techniques) conclusions of the last BREF on waste incineration, the operator asked us to help him determine a reliable solution for compliance with future Emission Limit Values (ELVs) of dioxins/furans and mercury.

Open cta in a new tab
Off
Background Grey
Off
One column
The Lhoist solution

In order to meet Rémival's expectations, Lhoist recommended the injection of Sorbacal® Micro 5099. 

This non-ATEX reagent was developed by Lhoist for the reduction of dioxins/furans and enhanced mercury capture. 

In order to evaluate the performance of the reagent, mercury analyzers were installed on-site for a month and made it possible to determine the: 

  • Concentration and speciation of mercury upstream of the injection of Sorbacal® Micro 5099 
  • Concentration of total mercury stack emissions 

During these tests, the dosing rate, defined according to the operating conditions, was preserved and kept constant at a value of 0.9 kg of reagent per ton of waste.
 

Open cta in a new tab
Off
Background Grey
Off
One column
The benefits

During the measurement period, the average mercury reduction rate was above 90% for an average concentration upstream of 153 µg/Nm3 (on dry gases at 11% O2).

Higher daily averages (up to 450 µg/Nm³) and numerous mercury peaks (close to 1,000 µg/Nm³) were easily controlled by the dosage of Sorbacal® Micro 5099. 

As expected, mercury in ionic form represented at least 85% of the total mercury. 
Monthly analysis of the sampling cartridges also confirmed compliance with dioxins & furans emissions. 

Sorbacal® Micro 5099 meets the needs of the Rémival site operator. 

Indeed, the use of this reagent not only makes it possible to maintain the downstream mercury concentration at a value of around 10 µg/Nm³ (at 11% O2 on dry gases) but also to respect the ELVs for dioxins and furans.
 

Open cta in a new tab
Off
Background Grey
Off
case study FGT N°25.png
Sorbacal® Micro 5099 enhances mercury and dioxin removal, ensuring stable ELV compliance.
Route category