Small
Image
Precious metal and non-ferrous metal powders
Disable image alteration
Off
Off
Additional non-ferrous market applications
One column - centered
Solutions for every non‑ferrous challenge

Beyond core markets such as copper, gold, alumina and lithium, lime and quicklime play a vital role across a wide range of non-ferrous and mining applications, helping improve metal recovery, stabilize processes and maintain environmental compliance. 

 

 

Open cta in a new tab
Off
Background Grey
Off
One column
Fluxing agents for smelting and refining

Lime - and where appropriate, limestone - functions as a key fluxing reagent in copper, nickel, aluminum and magnesium smelting and refining operations. It supports slag chemistry control, impurity management and overall furnace stability. In some copper smelters, lime is added to control slag viscosity caused by magnetite or to produce a lime‑rich slag in low-iron concentrates. Lime and limestone also contribute to several supporting processes, such as bismuth recovery, stable arsenic removal, improved gas scrubbing, and better dust filtration.

Open cta in a new tab
On
Background Grey
Off
One column
Nickel and cobalt recovery

Lime and limestone precipitate impurities (iron, aluminum, manganese, magnesium) during hydrometallurgical processing of sulphide and laterite ores, improving  - nickel and cobalt recovery, both critical for stainless steel and battery cathode materials.

Open cta in a new tab
On
Background Grey
Off
One column
Arsenic treatment

Lime supports the safe removal of arsenic from process solutions through scorodite precipitation, or by forming calcium arsenate/arsenite at higher pH - helping you meet strict environmental requirements.

Open cta in a new tab
Off
Background Grey
Off
One column
Transportable moisture limit (TML)

Quicklime reduces free moisture in iron ore and mineral concentrates, helping you to comply with TML shipping requirements, prevent dusting, and avoid dangerous cargo fluidization. 

Open cta in a new tab
Off
Background Grey
Off
One column
Wet sticky ore treatment

Quicklime mitigates “sticky ore” issues by reducing moisture, increasing evaporation through exothermic hydration and reacting with clays - improving material handling and flow properties. 

Open cta in a new tab
Off
Background Grey
Off
One column
Sulfide mineral odor treatment

Adding lime during solid–liquid separation of sulfide mineral concentrates, helps prevent the release of sulfur-based odors that can form when flotation reagents break down during storage, transport, and handling. 

Open cta in a new tab
Off
Background Grey
Off
One column
Coal dust explosion prevention

Milled limestone helps suppress coal dust explosions, in underground coal mines, by binding dust on mine walls and diluting airborne coal dust in the event of ignition. 

Open cta in a new tab
Off
Background Grey
Off
One column
Coal fire suppression

Slaked lime can be used to extinguish coal fires.

Open cta in a new tab
Off
Background Grey
Off
One column
Magnesium removal during potassium processing

Lime removes soluble MgCl from NaCl side- streams, enabling production of high purity sodium chloride. 

Open cta in a new tab
Off
Background Grey
Off
One column
Acid mine drainage (AMD/ARD)

Lime and limestone neutralize acidity and precipitate dissolved metals in AMD/ARD, protecting groundwater and surface water from contamination. 

Open cta in a new tab
Off
Background Grey
Off
One column
Lime in cemented paste backfill & tailings (CPB & CPT)

Lime (hydrated or slurry) enhances binder performance and environmental stability by: 

  • Improving sulphate resistance and pH control 
  • Accelerating early strength gain (CPB) 
  • Reducing acid generation and metal leaching (CPT) 
  • Supporting long term stability and trafficability 

Typical usage ranges: 

  • CPB: tailings 75–85%, cement 3–8%, lime 0.5–1% 
  • CPT: tailings >80%, cement 0.5–2%, lime 0.3–7% 

Lime can be supplied as hydrated powder or slurry, dosed through slaking systems, screw feeders or slurry pumps, and mixed in pugmills or high shear paste mixers.

Open cta in a new tab
Off
Background Grey
Off
Our non-ferrous fluxing products
Title
Find out more about other markets
Content type
Market
Optimize your non‑ferrous operations
Our experts can help you identify the most effective lime solution across smelting, refining, impurity removal, moisture control and more. Share your operational challenges - and we will work with you to strengthen performance and reliability.
Off
<noteaser>
Non ferrous
Non ferrous